This unit has a marine grade motor housing, a stainless steel pump body and a sealed on-off electrical switch making it weather resistant and suitable for outdoor use, for clean tank water only.(Not water from ponds, lakes, rivers etc)

Able to pump 3,700 litres per hour/ 61 litres per minute this pump is designed for pumping clean tank water which is connected to a system where the water flow is controlled with a tap.

Some 2300 watt power draining monsters not only pump up plenty of water but they also pump up your electricity bill!!!! At 1200 watts this pump is much, much cheaper to run and will still pump plenty of tank water for garden irrigation needs. Plus it won't empty your water tank in no time flat.

FEATURES:

• Weather proof cover
• Forced air cooling motor
• Stainless steel pump housing body
• Built-In Thermal Protection cutoff
• POWER: 1200 watts
• Pump Rate: 3,700 L/Hr 61 L/min
• Max pump height : 46 meters
• Suction height: 8m
• Max pressure: 4.6 bar
• Pipe diameter: 1 inch
• Weight: 9.5kg
• Power Cable Length: 1.2m
• Standard Australian 3-pin plug 240V supplied
• Manufactured to Australian safety & EMC standards
• No electrical installation necessary

SPECIFICATIONS:

• Brand: Hydro Active
• Material: Aluminium Housing with weather protection case
• Type: Weatherised
• Power: 1200W
• Unit Weight: 9.5kg
• Voltage: 240V - 50Hz
• Bar: 4.6 bar (Max pressure)

CONTENTS:

• 1 x 1200W Water Pump
• 1 x Automatic Pressure Controller
• 1 x Instructions Manual
• Carton Dimensions
• 48 x 23.5 x 27.5cm - 9.6kg

Australian Safety Compliance: Like all our pumps this unit has been manufactured and tested to strict Australian safety & EMC standards and we hold a current C-Tick certificate and electrical safety approval.